SA240 310S, SA240 TP 310S, SS 310S Plate, TP310S
Unitedsteel Stainless Factory is the large manufacturer to supply SA240 310S,SA240 TP 310S,SS 310S
Stainless plate,TP310S as per ASTM, ASME, JIS , EN, UNS Specs. We have about 3000tons each
thickness and size stainless plates and large warehouse. If you have any requirement for
stainless plate in competitive price and faster delivery time, please contact us.
Tags: SA240 310S, SA240 TP 310S, SS 310S Stainless plate,SS310, ASME SA240 310S,TP 310S
What forms of SA240 310S Stainless Steel are available at UNITEDSTEEL?
1). Stainless steel Plate & Sheet & Strip & Coil
Supply Dimensions: Thk: 0.8–100mm Wd: 500– 2500mm Lgth: 1000–12000mm
Surface Finish: 2B, BA, No.1, etc.
2). Pipe & Tube
3). Stainless Section Bar
4). Weld Wire
SA240 310S Stainless Steel Overview
Stainless steel SA240 310/310S is an austenitic heat resistant alloy with excellent Resistance to oxidation under mildly cyclic conditions through 2000ºF. Its high Cr and Ni contents provide comparable corrosion resistance, superior resistance to oxidation and the retention of a larger fraction of room temperature strength than the common austenitic alloys like Type 304.
Stainless 310 is often used at cryogenic temperatures, with excellent toughness to -450°F, and low magnetic permeability.
As you can see below, Type 310S is a low carbon version of grade 310. 310S is less prone to embitterment
and sensitization in service.
SS 310 Chemical Composition, %
| C | Ni | C | Si | Mn |
| 24.0-26.0 | 19.2-22.0 | 0.25 Max | 1.50 Max | 2.00 Max |
| P | S | Mo | Cu | |
| 0.045 Max | 0.03 Max | 0.75 Max | 0.50 Max |
SA240 310S Chemical Composition, %
| Cr | Ni | C | Si | Mn |
| 24.0-26.0 | 19.2-22.0 | 0.08 Max | 1.50 Max | 2.00 Max |
| P | S | Mo | Cu | |
| 0.045 Max | 0.03 Max | 0.75 Max | 0.50 Max |
What are the characteristics of 310/310S Stainless?
- Oxidation resistance to 2000°F
- Moderate strength at high temperature
- Resistance to hot corrosion
- Strength and toughness at cryogenic temperatures
Typical Applications for 310/310S Stainless
- Kilns
- Heat Exchangers
- Radiant Tubes
- Muffles, retorts, annealing covers
- Tube hangers for petroleum refining and steam boilers
- Coal gasified internal components
- Staggers
- Furnace parts, conveyor belts, rollers, oven linings, fans
- Food processing equipment
- Cryogenic structures
Fabrication with Stainless 310/310S
Type SA240 310S is readily fabricated by standard commercial procedures. In comparison to carbon steel,
stainless steels are tougher and tend to work harden rapidly.
Type SA240 310S can be welded using all of the common welding processes.
SA240 310S Mechanical Properties
Representative Tensile Properties
| Temperature, °F | Ultimate Tensile Strength, ksi | 0.2% Yield Strength, ksi | Elongation Percent | |
| 70 | 80 | 35 | 52 | |
| 1000 | 67.8 | 20.8 | 47 | |
| 1200 | 54.1 | 20.7 | 43 | |
| 1400 | 35.1 | 19.3 | 46 | |
| 1600 | 19.1 | 12.2 | 48 |
SA240 310S Typical Creep-Rupture Properties
| Temperature, °F | Minimum Creep 0.0001%/hr, ksi | 100,000 Hour Rupture Strength, ksi |
| 12000 | 14.9 | 14.4 |
| 1400 | 3.3 | 4.5 |
| 1600 | 1.1 | 1.5 |
| 1800 | 0.28 | 0.66 |
Unitedsteel Stainless Factory is the large manufacturer for ASTM, ASME, JIS, EN, UNS Stainless plate
and sheet. We have about 3000tons each thickness and size stainless plates and large warehouse.
If any requirement for stainless plate in competitive price and faster delivery time, please contact us.
Other related Stainless Plate For ASME SA240